Features

• 2 - 200 MHz frequency response specially contoured for
  use in reverse path of cable TV distribution.

• Very low noise.

• 0 - 20 dB variable input gain control.

• Local or remote muting.

• Input and output monitoring on front panel.

• Power loss alarm output.

General

The RWA-4300 has been designed to provide amplification of signals in the reverse path of cable TV distribution systems.
An input attenuator with a 20 dB range provides gain control to optimise signal levels at the output.

Due to the high levels of RF noise in the operating environment the frequency response of the amplifier is tailored to give optimum low noise amplification to the reverse path signals, which normally lie between 5 and 100 MHz.

In addition the RWA-4300 is constructed with a high level of RF shielding which eliminates both ingress and egress of unwanted RF signals.
The FRU-4300 allows 8 RWA-4300’s to be mounted in one 3 RU frame together with two PSU’s which may be either 240 Vac or -48 Vdc.