DISTRIBUTION AMPLIFIERS
Analogue Video
VA-700
8 O/P Analogue Video DA
AVA-3900
Triple 3 O/P Analogue Video
DA
VA-700
Eurocard Video Distribution Amplifier
Features
-
IRT Eurocard construction
- Loop through input
- Ten BNC outputs on
rear
- >30 MHz bandwidth
- Front panel
monitoring output
- Cable equalisation
to 300 metres
- Various clamping
options
- Longitudinal hum
stripping
- Front panel EQ &
gain adjustment
General
The VA-700 is a video
distribution amplifier of modular Eurocard construction having
facilities for cable equalisation, longitudinal hum reduction, and
clamping.
The input is a bridging loop through type to facilitate connection to
other equipment. Ten 75 Ω outputs are provided on the rear with an
additional output on the front panel for ease of monitoring.
The input and output grounds are separated to provide rejection of
longitudinally developed hum. The input is AC coupled and the output DC
restored with options for no clamping or clamping to the internal or an
external signal. The external clamping facility may be used to provide
correct DC restoration in YUV & RGB signal situations.
The video gain may be varied by ± 3 dB from the front panel. Internal
preset controls allow adjustment of the amplifier frequency response,
optimisation of the longitudinal hum rejection, and stage output DC
voltages.
Cable equalisation is
provided for up to 300 metres of 75 Ω high quality cable with adjustment
via the front panel. In addition the VA-700 may be fitted with an
optional additional equalisation sub-board and a switch to select
equalisation type.
The VA-700 may also be fitted with an optional subboard for mounting of
delay lines or filters. The DL-700 sub board also provides delay
adjustment trim and additional compensating gain for losses in long
delay lines (only available whilst
current stocks last).
The VA-700 may also be used as a pulse distribution amplifier. (Only 6
outputs may be used for 4 Vp-p)
The VA-700 is manufactured on an extended Eurocard board for mounting in
IRT Eurocard frames.
|